Sprockets position manual 377 Sprockets position manual Material: Polyamide Screws: Stainless steel / Nuts: Zinc plated steel Part Art-Nr. Z- eq. Bore Root Ø in-mm 1571 157150R 10 0.71* 1.77/85,1 1571 157151R 1 1571 157152R 1¹⁄₄ 1571 157153R 1⁷⁄₁₆ 1571 157154R 1¹⁄₂ 1572 157250R 13 0.71* 4.52/115,0 1572 157251R 1 1572 157252R 1¹⁄₄ 1572 157253R 1⁷⁄₁₆ 1572 157254R 1¹⁄₂ 1573 157350R 15 0.71* 5.28/134,3 1573 157351R 1 1573 157352R 1¹⁄₄ 1573 157353R 1⁷⁄₁₆ 1573 157354R 1¹⁄₂ 1574 157450R 16 0.71* 5.75/146,8 1574 157451R 1 1574 157452R 1¹⁄₄ 1574 157453R 1⁷⁄₁₆ 1574 157454R 1¹⁄₂ *Plain Bore Optimized sprockets position 600 A: 2”/51 / B: 3.34”/85 / C: 2.67”/68 D1: 4.01”/102 / D2: 3.68”/93.5 / E1: C: 6.02”/153 / E2: 5.69”/144.5 Root Diameter 1.10/28 B S with split support roller Split support roller Sprockets Position for: 600 Heavy duty / Small radius 600 TECHNICAL RECOMMENDATION: Fix support roller with split collars Part 215 IMPORTANT Add sprocket positions every 3.34” according to 3.34” width increments of the belt corresponding with 3.34” conveyor track pitch system. It’s NOT possible place the sprockets in this position. Sprockets teeth must press against the hinge loops, never against the module’s central bridge in the gap between the hinge loops. 215 215 215 215 SHAFT C SHAFT A B E2 A B E1 D1 D2 A C A B 215 215 215 215 C