b'Belting Specification SheetCatalog # 6 Pulley Diameter, MinimumItem number: 10398 Minimum Pulley Diameter 2.00 inDescription:3 Ply Poly 90 White Nitrile COS Belt Strength:International Designation: Tension Rating (PIW) 90 PIWN/AConstruction: Splice Instructions:Compound Top Cover White Nitrile Splice Step YesColor White Splice Finger NoTop Cover Thickness (in) (0.79 mm)1/32 in Other:Top Cover Description SmoothCompound Bottom Cover White Nitrile Static Conducting NoCross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoNumber of Plies 3 Oil Resistant YesFire Resistant NoOverall Gauge (in) (2.38 mm)3/32 in FDA Approved YesUnit Weight- lb/PIW 0.0620 lbs/PIW Suggested Fasteners:Carcass Type 0.000000 Flexco Plate/Rivet N/ACompound White Nitrile Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple N/AClipper Lace #1ATemperature Range (F)- Low 0 F Alligator Lace #7Special Characteristics:High-strength polyester carcass has great dimensional stability for less stretch and better tracking. Thin and flexible for small pulleys. Can be hot water and steam cleaned. FDA accepted.*****All Values are nominal and subject to change without notice.*****'