b'Light Weight Belting Specification SheetCatalog # 140EMB Pulley Diameter, MinimumItem number: 50237Description:NW 150 BLACK PVC EMB x Brushed FRInternational Designation:N/A A) Normal Flex (50.80 mm) 2.0000 inB) Back Flex (88.90 mm) 3.5000 inConstruction:Compound Top Cover Black PVC Belt Strength:Top Cover Thickness (in) (0.90 mm) 0.0354 in Pull for 1% Elongation (26 N/mm) 150 lbs/sq inTop Cover Description EmbossedTop Cover Shore 65A Splice Instructions:Compound Bottom Cover Polyester Fleece Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Impregnated Fleece Press Temperature (F) 356 FBottom Cover Shore N/A Press Pressure (psi) 19 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.60 mm) 0.1417 inUnit Weight- lb/PIW 0.0529 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 180 FTemperature Range (F)- Low 20 F Impression Top NoOil Resistant NoFire Resistant YesFDA Approved NoSpecial Characteristics:N/A*****All Values are nominal and subject to change without notice.*****'