b'Light Weight Belting Specification SheetCatalog # 108RCAS Pulley Diameter, MinimumItem number: 10814Description:2 Ply Poly CR46 White PU RC x Bare AS FDAInternational Designation:E8/2 U0/U4 White Matte AS FDA A) Normal Flex (20.07 mm) 0.7900 inB) Back Flex (29.97 mm) 1.1800 inConstruction:Compound Top Cover White PU Belt Strength:Top Cover Thickness (in) (0.41 mm) 0.0160 in Pull for 1% Elongation (8 N/mm) 46 lbs/sq inTop Cover Description Satin Release CoverTop Cover Shore 92 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.50 mm) 0.0590 inUnit Weight- lb/PIW 0.0258 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 84 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 108RCAS meets FDA compliance standards. The RC (Release Cover) makes this belt an excellent choice for applications where product release is important. The 108RCAS has a PU top cover giving it high abrasion resistance in addition to its high release properties. The belt is resistant to mineral oil, vegetable oils, fats, detergents.*****All Values are nominal and subject to change without notice.*****'