b'Light Weight Belting Specification SheetCatalog # 106F Pulley Diameter, MinimumItem number: 42452Description:2 Ply Poly 34 White PU Bare X Bare FDAInternational Designation:ES 6/2 0/U/0 White FDA A) Normal Flex (9.50 mm) 0.3740 inB) Back Flex (9.50 mm) 0.3740 inConstruction:Compound Top Cover Polyester Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (6 N/mm) 33 lbs/sq inTop Cover Description BareTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.70 mm) 0.0669 inUnit Weight- lb/PIW 0.0275 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 176 FTemperature Range (F)- Low -4 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved YesSpecial Characteristics:#106F features a ribbed polyester surface designed for dough handling where a bit of extra grip is required.Often used as a bagel machine belt.The PU inner layer allows for durable belt splices.*****All Values are nominal and subject to change without notice.*****'