b'Light Weight Belting Specification SheetCatalog # 115 Pulley Diameter, MinimumItem number: 10776Description:2 Ply Poly 57 Green PVC C x IP ASInternational Designation:E10/2 V10IP/V10 Green AS A) Normal Flex (80.01 mm) 3.1500 inB) Back Flex (80.01 mm) 3.1500 inConstruction:Compound Top Cover Green PVC Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0393 in Pull for 1% Elongation (10 N/mm) 57 lbs/sq inTop Cover Description SmoothTop Cover Shore 70 Splice Instructions:Compound Bottom Cover Green PVC Foil YesBottom Cover Thickness (in) (1.00 mm) 0.0393 in Splice Process FingerBottom Cover Description Inverted Pyramid Press Temperature (F) 330 FBottom Cover Shore 70 Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.00 mm) 0.1181 inUnit Weight- lb/PIW 0.0597 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid NoTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The 115 is a general purpose conveyor belt used when a cover is needed on both sides of the belt. This belt has a smooth PVC top cover and inverted pyramid bottom cover. Commonly used in material handling applications on roller bed conveyors or non slider bed systems. This belt can be utilized in many troughing applications, especially roller style conveyor beds.*****All Values are nominal and subject to change without notice.*****'