b'Light Weight Belting Specification SheetCatalog # 105 Pulley Diameter, MinimumItem number: 10862Description:2 Ply Poly/Cotton 50 White PVC Bare x Bare FDAInternational Designation:EC5/2 0/V/0 Tan NA FDA A) Normal Flex (20.00 mm) 0.7874 inB) Back Flex (25.00 mm) 0.9843 inConstruction:Compound Top Cover Cotton-Polyester Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (5 N/mm) 29 lbs/sq inTop Cover Description BareTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Cotton-Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 22 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.80 mm) 0.0709 inUnit Weight- lb/PIW 0.0291 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 79 in Cross Rigid NoTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 105 meets FDA compliance standards. This belt has a polyester cotton cover designed for bakery applications. The 105 has good absorption properties and is oil and grease resistant.*****All Values are nominal and subject to change without notice.*****'