b'Light Weight Belting Specification SheetCatalog # 2B15 Pulley Diameter, MinimumItem number: 41885Description:IWP 140 3/32in Red Urethane X FSInternational Designation:EM24/M UO/U24 Red A) Normal Flex (100.00 mm) 3.9370 inB) Back Flex (200.00 mm) 7.8740 inConstruction:Compound Top Cover Red PU Belt Strength:Top Cover Thickness (in) (2.40 mm) 0.0945 in Pull for 1% Elongation (25 N/mm) 140 lbs/sq inTop Cover Description GlossTop Cover Shore 92 Splice Instructions:Compound Bottom Cover Solid Woven Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Friction Surface Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (5.00 mm) 0.1969 inUnit Weight- lb/PIW 0.0916 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 118 Cross Rigid NoTemperature Range (F)- High 176 FTemperature Range (F)- Low 5 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The 2B15 is an excellent choice for tough applications found in recycling and metal stamping plants. The 92 Shore A PU cover is cut and gouge resistant.*****All Values are nominal and subject to change without notice.*****'