b'Light Weight Belting Specification SheetCatalog # 104 Pulley Diameter, MinimumItem number: 10834Description:2 Ply Poly CR45 White PVC Bare x Bare FDAInternational Designation:E8/2 0/V/0 White NA FDA A) Normal Flex (39.98 mm) 1.5740 inB) Back Flex (39.98 mm) 1.5740 inConstruction:Compound Top Cover Polyester Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (8 N/mm) 45 lbs/sq inTop Cover Description BareTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 20 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.60 mm) 0.0630 inUnit Weight- lb/PIW 0.0307 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 104 meets FDA compliance standards. This is an excellent belt for accumulation and diverting applications. The 104 has good resistance to animal, mineral and vegetable oils and fats. Most commonly used for bakeries, biscuit and pastries, bread and dough applications.*****All Values are nominal and subject to change without notice.*****'