b'Light Weight Belting Specification SheetCatalog # 138 Pulley Diameter, MinimumItem number: 22584Description:2 Ply 160 Black LI x B FRInternational Designation:EM28/2 0/15 SBR Black LI x B FR A) Normal Flex (50.80 mm) 2.0000 inB) Back Flex (101.60 mm) 4.0000 inConstruction:Compound Top Cover Black SBR Belt Strength:Top Cover Thickness (in) (1.52 mm) 0.0600 in Pull for 1% Elongation (28 N/mm) 160 lbs/sq inTop Cover Description Impression TexturedTop Cover Shore 55 Splice Instructions:Compound Bottom Cover Treated Duck Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 300 FBottom Cover Shore N/A Press Pressure (psi) 30 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.43 mm) 0.1350 inUnit Weight- lb/PIW 0.0733 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 180 F High Heat NoTemperature Range (F)- Low -30 F Impression Top YesOil Resistant NoFire Resistant YesFDA Approved NoSpecial Characteristics:The 138 is specifically used for power turn applications in airports and distributions centers. The top cover is a 1.5 mm thick SBR with a light impression for excellent grip and wear resistance, this belt is also flame retardant.*****All Values are nominal and subject to change without notice.*****'