b'Light Weight Belting Specification SheetCatalog # 108CL Pulley Diameter, MinimumItem number: 10746Description:2 PUR I 160 I / LWInternational Designation:E13/2 U0/U16 Clear Matte NA EU A) Normal Flex (130.00 mm) 5.1180 inB) Back Flex (179.98 mm) 7.0860 inConstruction:Compound Top Cover Clear PU Belt Strength:Top Cover Thickness (in) (1.57 mm) 0.0620 in Pull for 1% Elongation (13 N/mm) 74 lbs/sq inTop Cover Description MatteTop Cover Shore 92 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 28 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.99 mm) 0.1570 inUnit Weight- lb/PIW 0.0785 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:Our 108CL belt is regarded as our top of the line urethane belt for eddy current, meat preparation, deboning, metal stamping, optical scanning and automotive applications. The 108CL has a 1.6mm thick top cover at 92 durometer shore A rating which offers extremely high wear characteristics suited for stamping applications or conveying metal parts in the automotive industry. This belt offers high dimensional stability across the weft that allows a completely flat belt on the conveyor system, the intermediate layer is also made of high grade urethane for finger over finger splices. Complies with FDA regulations and EU recommendations for the transport of foodstuffs,regulations include 1935/2004/EC and 2023/2006/EC.*****All Values are nominal and subject to change without notice.*****'