b'Light Weight Belting Specification SheetCatalog # 172B Pulley Diameter, MinimumItem number: 49047Description:3 Ply 120 Black 57A 1/2in Diamond x BareInternational Designation:EPQ CS57 SP111 A) Normal Flex (120.65 mm) 4.7500 inB) Back Flex (146.05 mm) 5.7500 inConstruction:Compound Top Cover Black NR/SBR Belt Strength:Top Cover Thickness (in) (8.03 mm) 0.3160 in Pull for 1% Elongation (21 N/mm) 120 lbs/sq inTop Cover Description SP111 12mm DiamondTop Cover Shore 57A Splice Instructions:Compound Bottom Cover n/a Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 0 FBottom Cover Shore N/A Press Pressure (psi) 0 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (10.87 mm) 0.4280 inUnit Weight- lb/PIW 0.1800 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 in Cross Rigid NoTemperature Range (F)- High 220 FTemperature Range (F)- Low 20 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:Anti-Static and mark resistant. Good grip and surface calibration accuracy.*****All Values are nominal and subject to change without notice.*****'