b'Light Weight Belting Specification SheetCatalog # 178 Pulley Diameter, MinimumItem number: 49996Description:4 Ply 170 Grey 50A 3/8in Square x BareInternational Designation:EMQP CB50 SP110 A) Normal Flex (152.40 mm) 6.0000 inB) Back Flex (177.80 mm) 7.0000 inConstruction:Compound Top Cover Grey NR/SBR Belt Strength:Top Cover Thickness (in) (8.03 mm) 0.3160 in Pull for 1% Elongation (30 N/mm) 170 lbs/sq inTop Cover Description SP110 10mm SquareTop Cover Shore 50A Splice Instructions:Compound Bottom Cover None Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 0 FBottom Cover Shore N/A Press Pressure (psi) 0 lbs/sq inNumber of Plies 4 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (13.72 mm) 0.5400 inUnit Weight- lb/PIW 0.2400 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 in Cross Rigid NoTemperature Range (F)- High 220 FTemperature Range (F)- Low 20 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:Non-Marking. Good grip and surface calibration accuracy for longer wood finishing machine belts. Shore A 50 durometer maintains good tack for sheet puller belts or light incline applications.*****All Values are nominal and subject to change without notice.*****'