b'Light Weight Belting Specification SheetCatalog # 132B Pulley Diameter, MinimumItem number: 10762Description:2 Ply Poly 69 Blue PU NA FDAInternational Designation:EM12/2 0/U2 Blue PU NA A) Normal Flex (10.00 mm) 0.3937 inB) Back Flex (40.00 mm) 1.5748 inConstruction:Compound Top Cover Blue PU Belt Strength:Top Cover Thickness (in) (0.20 mm) 0.0079 in Pull for 1% Elongation (12 N/mm) 69 lbs/sq inTop Cover Description MatteTop Cover Shore 87 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.80 mm) 0.0709 inUnit Weight- lb/PIW 0.0376 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 102 in Cross Rigid NoTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 132B is specifically manufactured for Beltservice with a blue PU cover and a high strength multifilament carcass most commonly used for Power Turn applications. This unique blue PU cover is suitable for applications for direct food contact and stain resistance due to oils and fat saturation.*****All Values are nominal and subject to change without notice.*****'