b'Light Weight Belting Specification SheetCatalog # 118R Pulley Diameter, MinimumItem number: 25036Description:2 Ply Poly CR79 Red PVC LG x Bare ASInternational Designation:E14/2 0/V45 Red LG x B AS A) Normal Flex (50.04 mm) 1.9700 inB) Back Flex (79.76 mm) 3.1400 inConstruction:Compound Top Cover Red PVC Belt Strength:Top Cover Thickness (in) (4.57 mm) 0.1800 in Pull for 1% Elongation (14 N/mm) 79 lbs/sq inTop Cover Description Longitudinally GroovedTop Cover Shore 45 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (6.35 mm) 0.2500 inUnit Weight- lb/PIW 0.1175 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 23 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:This 2 Ply Red Longitudinal Groove belt offers maximum flexibility in a belt with a high grip 4.5mm thick top cover and small 2" minimum pulley allowance. For use in corrugated box applications, inclines/declines and indexing conveyors where speed sorting is required. This belt will out perform all PVC Rough Top belts for case taper applications by 3-4 times the life.*****All Values are nominal and subject to change without notice.*****'