b'Belting Specification SheetCatalog # 75a Pulley Diameter, MinimumItem number: 10468 Min. Pulley Dia. - Head @ 80 - 100%16.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%14.00 in3 Ply 225 1/8in x Bare MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension10.00 inN/A or BelowMinimum Pulley Diameter- Tail 10.00 inConstruction: Splice Instructions:Compound Top Cover Black MOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (3.30 mm)1/8 in Other:Top Cover Description SmoothCompound Bottom Cover Poly/Nylon Static Conducting NoBottom Cover Thickness (in) (0.00 mm) 0.00 in Cross Rigid NoBottom Cover Description Bare High Heat NoImpression Top NoNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (6.35 mm)1/4 in Fire Resistant NoUnit Weight- lb/PIW 0.1560 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black MOR Flexco Plate/Rivet #140/R5Temperature Range (F)- High 225 FTemperature Range (F)- Low -25 F Flexco Hinged #375 or 550Alligator Staple N/ABelt Strength: Clipper Lace N/AAlligator Lace N/ATension Rating (PIW) 225 PIWSpecial Characteristics:This belt features a high-strength 3 ply polyester carcass. Also used for heavier applications needing a tough cover with a low-friction bottom. Moderately oil resistant for processing wood chips, paper and scrap.*****All Values are nominal and subject to change without notice.*****'