b'Light Weight Belting Specification SheetCatalog # 174 Pulley Diameter, MinimumItem number: 42204Description:3 Ply 170 White 70A Hypalon Smooth x Bare HR/ORInternational Designation:TED100/3 HB Smooth A) Normal Flex (152.40 mm) 6.0000 inB) Back Flex (177.80 mm) 7.0000 inConstruction:Compound Top Cover White CSM Hypalon Belt Strength:Top Cover Thickness (in) (5.00 mm) 0.1970 in Pull for 1% Elongation (30 N/mm) 170 lbs/sq inTop Cover Description SmoothTop Cover Shore 70A Splice Instructions:Compound Bottom Cover None Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 0 FBottom Cover Shore N/A Press Pressure (psi) 0 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (9.98 mm) 0.3930 inUnit Weight- lb/PIW 0.1700 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 Cross Rigid NoTemperature Range (F)- High 300 FTemperature Range (F)- Low -40 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:Non-marking. High abrasion resistance. Ozone / low temperature resistant. Suitable for moderate heat, and oil resistance.*****All Values are nominal and subject to change without notice.*****'