b'Belting Specification SheetCatalog # 74a Pulley Diameter, MinimumItem number: 10427 Min. Pulley Dia. - Head @ 80 - 100%16.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%14.00 in2 Ply 220 1/8in x 1/16in FR/SC/MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension10.00 inN/A or BelowMinimum Pulley Diameter- Tail 10.00 inConstruction: Splice Instructions:Compound Top Cover Black FR-MOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (3.30 mm)1/8 in Other:Top Cover Description SmoothCompound Bottom Cover Black FR-MOR Static Conducting YesBottom Cover Thickness (in) (1.60 mm)1/16 in Cross Rigid NoBottom Cover Description Smooth High Heat NoImpression Top NoNumber of Plies 2 Oil Resistant YesOverall Gauge (in) (7.87 mm)19/64 in Fire Resistant YesUnit Weight- lb/PIW 0.1660 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black FR-MOR Flexco Plate/Rivet #140/R5Temperature Range (F)- High 225 FTemperature Range (F)- Low -25 F Flexco Hinged #375 or 550Alligator Staple N/ABelt Strength: Clipper Lace N/AAlligator Lace N/ATension Rating (PIW) 220 PIWSpecial Characteristics:Specially compounded for the oily effects of grain, this belt is also static conductive. It carries the FR designation for flame resistance for above ground applications. Designed for grain conveyors and elevators where static charges must be held to a minimum.*****All Values are nominal and subject to change without notice.*****'