b'Light Weight Belting Specification SheetCatalog # 116J Pulley Diameter, MinimumItem number: 29382Description:2 Ply Poly CR57 Petrol Green PVC Jink RT x QWInternational Designation:E10/2 0/V37 Green Jink RT x QW NA A) Normal Flex (59.94 mm) 2.3600 inB) Back Flex (99.82 mm) 3.9300 inConstruction:Compound Top Cover Green PVC Belt Strength:Top Cover Thickness (in) (3.70 mm) 0.1456 in Pull for 1% Elongation (10 N/mm) 57 lbs/sq inTop Cover Description RoughtopTop Cover Shore 35 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Quiet Weave Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (5.30 mm) 0.2086 inUnit Weight- lb/PIW 0.0750 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 140 F High Heat NoTemperature Range (F)- Low -4 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The 116J has a soft 35 shore A green PVC wavy rough top cover that makes this a great choice incline/decline applications. Most commonly used in distribution centers for sorting, indexing and case taper belts. The PVC top cover profile is a wavy design to help reduce noise on snub rollers, it also eliminates the vibration or jumping effect from small diameter snub rollers. Consider this belt in applications where small pulleys are needed.*****All Values are nominal and subject to change without notice.*****'