b'Light Weight Belting Specification SheetCatalog # 108NFW-NA Pulley Diameter, MinimumItem number: 50227Description:2PURB25H/SWInternational Designation:ENF 7/2 U0/U25 White MT EU A) Normal Flex (14.99 mm) 0.5900 inB) Back Flex (24.89 mm) 0.9800 inConstruction:Compound Top Cover White PU Belt Strength:Top Cover Thickness (in) (0.25 mm) 0.0098 in Pull for 1% Elongation (7 N/mm) 40 lbs/sq inTop Cover Description MatteTop Cover Shore 93 Shore A Splice Instructions:Compound Bottom Cover N/A Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Impregnated Press Temperature (F) 302 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.40 mm) 0.0551 inUnit Weight- lb/PIW 0.0264 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 140 FTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:#108NFW-NA features a 2 ply non-fray polyester fabric with a 93 Shore A white PU matte finish cover.It is ideal for use in food processing applications where edge fray is a concern.Compatible with metal detectors.*****All Values are nominal and subject to change without notice.*****'