b'Light Weight Belting Specification SheetCatalog # 175 Pulley Diameter, MinimumItem number: 49046Description:2 Ply 80 Black 57A 1/2in Diamond x BareInternational Designation:ELG CS57 SP111 A) Normal Flex (88.90 mm) 3.5000 inB) Back Flex (101.60 mm) 4.0000 inConstruction:Compound Top Cover Black NR/SBR Belt Strength:Top Cover Thickness (in) (5.99 mm) 0.2360 in Pull for 1% Elongation (14 N/mm) 80 lbs/sq inTop Cover Description SP111 12mm DiamondTop Cover Shore 57A Splice Instructions:Compound Bottom Cover n/a Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 0 FBottom Cover Shore N/A Press Pressure (psi) 0 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (8.13 mm) 0.3200 inUnit Weight- lb/PIW 0.1000 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 in Cross Rigid NoTemperature Range (F)- High 220 FTemperature Range (F)- Low 20 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:Anti-Static and mark resistant. Good grip and surface calibration accuracy. For surface finishing machines, this belt offers a premium alternative to roughtop belts due to the carcass engineered for transverse stability and ability to apply precision finishing on the flat plane of the diamond cover.*****All Values are nominal and subject to change without notice.*****'