b'Belting Specification SheetCatalog # 46a Pulley Diameter, MinimumItem number: 10586 Minimum Pulley Diameter 3.00 inDescription:3 Ply Red Silicone Covered HSW Belt Strength:International Designation: Tension Rating (PIW) 90 PIWN/AConstruction: Splice Instructions:Compound Top Cover Red Silicone Splice Step YesColor Red Splice Finger NoTop Cover Thickness (in) (0.79 mm)1/64 in Other:Top Cover Description SiliconeCompound Bottom Cover Black SBR Static Conducting NoCross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat YesBottom Cover Description Friction Surface Impression Top NoNumber of Plies 3 Oil Resistant NoFire Resistant NoOverall Gauge (in) (3.56 mm)1/8 in FDA Approved NoUnit Weight- lb/PIW 0.0560 lbs/PIW Suggested Fasteners:Carcass Type Cotton-Polyester Flexco Plate/Rivet N/ACompound Black SBR Flexco Hinged N/ATemperature Range (F)- High 500 F Alligator Staple #125Clipper Lace #2Temperature Range (F)- Low -100 F Alligator Lace #15Special Characteristics:Specially designed for applications requiring release of wet, sticky, or warm products like uncured rubber and PVC. These belts are used primarily in the tire and rubber industry. Cover surface rated for up to 500 Degree Material - Carcass rated at 250 Degrees. *DO NOT USE IN OVEN APPLICATIONS* Coatings available in different colors and thicknesses. Other base belts available, priced on application.*****All Values are nominal and subject to change without notice.*****'