b'Light Weight Belting Specification SheetCatalog # 117A Pulley Diameter, MinimumItem number: 10878Description:3 Ply Poly HCR 86 White PVC x Bare FDAInternational Designation:E15/3 0/V5 HCR White PVC A) Normal Flex (100.00 mm) 3.9370 inB) Back Flex (180.00 mm) 7.0866 inConstruction:Compound Top Cover White PVC Belt Strength:Top Cover Thickness (in) (0.50 mm) 0.0197 in Pull for 1% Elongation (15 N/mm) 86 lbs/sq inTop Cover Description MatteTop Cover Shore 65 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 340 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.90 mm) 0.1535 inUnit Weight- lb/PIW 0.0733 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 117A is specifically manufactured with a 3 ply Highly Cross Rigid (HCR) monofilament carcass designed for use on conveyors with horizontal to incline and "Z" type conveyor configurations. The special monofilament cross members give it high rigidity with the ability to handle small pulley diameters.*****All Values are nominal and subject to change without notice.*****'