b'Light Weight Belting Specification SheetCatalog # 304MFR Pulley Diameter, MinimumItem number: 49839Description:2 Ply 90 Mono SBR Bare x Bare FRInternational Designation:PH E15/2 QW/R/MF FR AS A) Normal Flex (25.40 mm) 1.0000 inB) Back Flex (25.40 mm) 1.0000 inConstruction:Compound Top Cover Bare RFL Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (16 N/mm) 90 lbs/sq inTop Cover Description BareSplice Instructions:Compound Bottom Cover Bare RFL Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process n/aBottom Cover Description Bare Press Temperature (F) 0 FNumber of Plies 2 Press Pressure (psi) 0 lbs/sq inNote:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your Overall Gauge (in) (2.87 mm) 0.1130 in press before attempting the actual belt splice.Unit Weight- lb/PIW 0.0575 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 72 Cross Rigid YesTemperature Range (F)- High 225 FTemperature Range (F)- Low -20 F Impression Top NoOil Resistant NoFire Resistant YesFDA Approved NoSpecial Characteristics:#304MFR is a black 2 ply 90 lb. rated rubber monofilament belt with a low friction surface on both sides.This flame retardant belt is commonly used on accumulating or diverting conveyors in package handling facilities.Stocked in 72 width.*****All Values are nominal and subject to change without notice.*****'