b'Light Weight Belting Specification SheetCatalog # 111B Pulley Diameter, MinimumItem number: 32699Description:2 Ply Poly CR69 Petrol Green PVC C x B NAInternational Designation:E12/2 0/V1 Green PVC Gloss NA A) Normal Flex (50.04 mm) 1.9700 inB) Back Flex (100.08 mm) 3.9400 inConstruction:Compound Top Cover Green PVC Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0393 in Pull for 1% Elongation (12 N/mm) 69 lbs/sq inTop Cover Description GlossTop Cover Shore 70 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.79 mm) 0.1100 inUnit Weight- lb/PIW 0.0458 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 5 PIW Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The 111B is a general purpose conveyor belt designed for cleating and sidewall belt applications. A smooth Glossy 1.0 mm thick 70 durometer PVC top cover offers a great option for eddy current applications for wear and abrasion resistance. This belt can be used in a variety of industrial applications due to its dimensional stability and strength. A strong 12n/mm strength gives you a strong carcass for low stretch and conveying heavy loads for recycling, distribution centers and automotive applications. Stocked in 118" wide widths for Marquip stacker applications in the corrugated box industry and many more wide applications.*****All Values are nominal and subject to change without notice.*****'