b'Light Weight Belting Specification SheetCatalog # 104AS Pulley Diameter, MinimumItem number: 10802Description:2 Ply Poly CR45 White PU AS Bare x Bare AS FDAInternational Designation:E8/2 U0/U0 White AS FDA A) Normal Flex (9.91 mm) 0.3900 inB) Back Flex (9.91 mm) 0.3900 inConstruction:Compound Top Cover Polyester Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (8 N/mm) 45 lbs/sq inTop Cover Description PU ImpregnatedTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 324 FBottom Cover Shore N/A Press Pressure (psi) 21 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.30 mm) 0.0512 inUnit Weight- lb/PIW 0.0239 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 104AS meets FDA compliance standards. The 104AS has a low friction anti static polyester fabric on both top and bottom sides with a PU center skim. This belt is an excellent choice for accumulation, diverting, bakeries, material handling, packaging and paper converting applications.*****All Values are nominal and subject to change without notice.*****'