b'Light Weight Belting Specification SheetCatalog # 108MD Pulley Diameter, MinimumItem number: 49030Description:2 Ply Poly CR45 Blue Hytrel C x FS MD ASInternational Designation:E8/2 U0/H2 Blue MD AS FDA/EU A) Normal Flex (20.07 mm) 0.7900 inB) Back Flex (50.04 mm) 1.9700 inConstruction:Compound Top Cover Blue Hytrel Belt Strength:Top Cover Thickness (in) (0.25 mm) 0.0100 in Pull for 1% Elongation (8 N/mm) 45 lbs/sq inTop Cover Description MatteTop Cover Shore 93 Splice Instructions:Compound Bottom Cover PU Impregnated Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 325 FBottom Cover Shore N/A Press Pressure (psi) 28 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.52 mm) 0.0600 inUnit Weight- lb/PIW 0.0292 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 212 FTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:#108MD is the 2 ply version of #103MD.The Hytrel thermoplastic cover is both metal and x-ray detectable.Detectability is an issue of growing interest in the food processing industry.The Hytrel cover has a silk matte finish that is non-porous and easy to clean.It has excellent release characteristics for sticky food products and great thermal conductivity properties for use in cooling tunnels.The belt has a wide temperature rating range from -20 C to +100 C.Stocked in 2 meter width.*****All Values are nominal and subject to change without notice.*****'