b'Light Weight Belting Specification SheetCatalog # 170 Pulley Diameter, MinimumItem number: 42200Description:3 Ply 120 Grey 50A 20mm Diamond x BareInternational Designation:EPQ CB50 SP108 A) Normal Flex (203.20 mm) 8.0000 inB) Back Flex (228.60 mm) 9.0000 inConstruction:Compound Top Cover Grey NR/SBR Belt Strength:Top Cover Thickness (in) (6.35 mm) 0.2500 in Pull for 1% Elongation (21 N/mm) 120 lbs/sq inTop Cover Description SP108 20mm DiamondTop Cover Shore 50A Splice Instructions:Compound Bottom Cover n/a Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 300 FBottom Cover Shore N/A Press Pressure (psi) 75 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (10.41 mm) 0.4100 inUnit Weight- lb/PIW 0.1750 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 in Cross Rigid NoTemperature Range (F)- High 220 F High Heat NoTemperature Range (F)- Low 20 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:Non-Marking. Good grip and surface calibration accuracy for wood finishing machine belts. Shore A 50 durometer maintains a a high friction contact surface for sheet puller belts or light incline applications.*****All Values are nominal and subject to change without notice.*****'