b'Light Weight Belting Specification SheetCatalog # 116A Pulley Diameter, MinimumItem number: 10764Description:2 Ply Poly 86 Blue AS PVC ST x BareInternational Designation:E15/2 0/V20AS Blue PVC x B A) Normal Flex (80.01 mm) 3.1500 inB) Back Flex (99.82 mm) 3.9300 inConstruction:Compound Top Cover Blue PVC Belt Strength:Top Cover Thickness (in) (2.00 mm) 0.0787 in Pull for 1% Elongation (15 N/mm) 86 lbs/sq inTop Cover Description Sticky TopTop Cover Shore 45 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (4.10 mm) 0.1614 inUnit Weight- lb/PIW 0.0816 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 23 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The soft 45 durometer top cover makes this belt an excellent choice for steep inclines/declines. Used in applications such as package handling, small parts conveying and moving plastic containers up inclines. When using this type of belt, special care should be taken to keep dust to a minimum, clean with a denatured alcohol only. Excellent belt for compression applications requiring positive product contact.*****All Values are nominal and subject to change without notice.*****'