b'Light Weight Belting Specification SheetCatalog # 103F Pulley Diameter, MinimumItem number: 42448Description:1 Ply Poly 23 Light Green FS X FS FDAInternational Designation:E4/1 U0/U0 Light Green FDA A) Normal Flex (6.30 mm) 0.2480 inB) Back Flex (6.30 mm) 0.2480 inConstruction:Compound Top Cover PU Impregnated Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (4 N/mm) 22 lbs/sq inTop Cover Description PU ImpregnatedTop Cover Shore N/A Splice Instructions:Compound Bottom Cover PU Impregnated Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (0.60 mm) 0.0236 inUnit Weight- lb/PIW 0.0075 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 176 FTemperature Range (F)- Low -4 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved YesSpecial Characteristics:#103F is used primarily in chocolate enrobing and weigh scale operations.It can be used with very tight transfers with its minimum pulley diameter rating of 6.3mm.*****All Values are nominal and subject to change without notice.*****'