b'Light Weight Belting Specification SheetCatalog # 116 Pulley Diameter, MinimumItem number: 10810Description:2 Ply Poly CR57 Petrol Green PVC RT x BareInternational Designation:E10/2 0/V40 Green PVC RT NA A) Normal Flex (19.99 mm) 0.7870 inB) Back Flex (59.94 mm) 2.3600 inConstruction:Compound Top Cover Green PVC Belt Strength:Top Cover Thickness (in) (4.00 mm) 0.1574 in Pull for 1% Elongation (10 N/mm) 57 lbs/sq inTop Cover Description RoughtopTop Cover Shore 55 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (5.28 mm) 0.2080 inUnit Weight- lb/PIW 0.0766 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 23 F Impression Top YesOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:The soft 55 shore A PVC cover makes this a great choice for incline/decline applications. Most commonly used in distribution centers for sorting, indexing and case taper belts. The top cover is antistatic and abrasion resistant PVC, extending the life of belts in wood sanding applications. Consider this belt in applications where small pulleys are needed.*****All Values are nominal and subject to change without notice.*****'