b'Belting Specification SheetCatalog # 140c Pulley Diameter, MinimumItem number: 10566 Min. Pulley Dia. - Head @ 80 - 100%18.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%16.00 in3 Ply 330 1/8in x Bare Cleat Top MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension12.00 inN/A or BelowMinimum Pulley Diameter- Tail 12.00 inConstruction: Splice Instructions:Compound Top Cover Black MOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (3.30 mm)1/8 in Other:Top Cover Description CleatedCompound Bottom Cover Black MOR Static Conducting NoBottom Cover Thickness (in) (0.00 mm) 0.00 in Cross Rigid NoBottom Cover Description Bare High Heat NoImpression Top YesNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (10.16 mm)25/64 in Fire Resistant NoUnit Weight- lb/PIW 0.2300 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black MOR Flexco Plate/Rivet #190/R5Temperature Range (F)- High 225 FTemperature Range (F)- Low -25 F Flexco Hinged #550Alligator Staple N/ABelt Strength: Clipper Lace N/AAlligator Lace N/ATension Rating (PIW) 330 PIWSpecial Characteristics:Made to prevent or reduce slideback on steep inclines. Chevron belting also increases conveyor capacity by quick pick-up at the point of loading. Ideal for slider bed applications, handling wet and/or granular materials such as wet sand and gravel. Also popular in recycling and wood chip applications.***NOTE: OAG DOES NOT INCLUDE THE CLEAT HEIGHT********All Values are nominal and subject to change without notice.*****'