b'Belting Specification SheetCatalog # 80c Pulley Diameter, MinimumItem number: 10520 Min. Pulley Dia. - Head @ 80 - 100%24.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%20.00 in3 Ply 600 1/16in x 1/16in FR/SC/VOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension18.00 inN/A or BelowMinimum Pulley Diameter- Tail 18.00 inConstruction: Splice Instructions:Compound Top Cover Black FR-VOR Splice Step Size 16.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (1.60 mm)1/16 in Other:Top Cover Description SmoothCompound Bottom Cover Black FR-VOR Static Conducting YesBottom Cover Thickness (in) (1.60 mm)1/16 in Cross Rigid NoBottom Cover Description Smooth High Heat NoImpression Top NoNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (9.53 mm)3/8 in Fire Resistant YesUnit Weight- lb/PIW 0.1900 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black FR-VOR Flexco Plate/Rivet BR-6/R5-1/2Temperature Range (F)- High 225 FTemperature Range (F)- Low -25 F Flexco Hinged N/AAlligator Staple N/ABelt Strength: Clipper Lace N/AAlligator Lace N/ATension Rating (PIW) 600 PIWSpecial Characteristics:Specially compounded for the oily effects of grain, this belt is also static conductive. It carries the FR designation for flame resistance for above ground applications. Designed for grain conveyors and elevators where static charges must be held to a minimum. VOR compound is resistant to mineral oil and vegetable oil sprays.*****All Values are nominal and subject to change without notice.*****'