b'Light Weight Belting Specification SheetCatalog # 115C Pulley Diameter, MinimumItem number: 49501Description:2 Ply Poly F255 White PVC ID x IDInternational Designation:EF 45/2 V10ID/V10ID White A) Normal Flex (200.00 mm) 7.8740 inB) Back Flex (200.00 mm) 7.8740 inConstruction:Compound Top Cover White PVC Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0394 in Pull for 1% Elongation (45 N/mm) 255 lbs/sq inTop Cover Description N/ATop Cover Shore N/A Splice Instructions:Compound Bottom Cover White PVC Foil YesBottom Cover Thickness (in) (1.00 mm) 0.0394 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 342 FBottom Cover Shore N/A Press Pressure (psi) 32 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (5.20 mm) 0.2047 inUnit Weight- lb/PIW 0.1130 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 158 FTemperature Range (F)- Low 14 F Impression Top YesOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:#115C features a very strong 2 ply multifilament polyester carcass paired with white PVC covers that have an inverted diamond surface on both sides of the belt.It can be used in stone processing and bucket elevator applications.Great for troughed applications!*****All Values are nominal and subject to change without notice.*****'