b'Light Weight Belting Specification SheetCatalog # 103F Pulley Diameter, MinimumItem number: 42448Description:1 Ply Poly 23 Light Green FS X FS FDAInternational Designation:E4/1 U0/U0 Light Green FDA A) Normal Flex (6.30 mm) 0.2480 inB) Back Flex (6.30 mm) 0.2480 inConstruction:Compound Top Cover PU Impregnated Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (4 N/mm) 22 lbs/sq inTop Cover Description PU ImpregnatedTop Cover Shore N/A Splice Instructions:Compound Bottom Cover PU ImpregnatedBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process SkiveBottom Cover Description PU ImpregnatedBottom Cover Shore N/ANumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will show different results.We recommend that you do a test splice with your Anti Static No press before attempting the actual belt splice.Overall Gauge (in) (0.60 mm) 0.0236 inUnit Weight- lb/PIW 0.0075 lbs/PIW Other:Material Between Plies N/A Cross Rigid NoMaximum Width (in) 72Temperature Range (F)- High 176 F Impression Top NoTemperature Range (F)- Low -4 F Oil Resistant NoFire Resistant NoFDA Approved YesSpecial Characteristics:#103F is used primarily in chocolate enrobing and weigh scale operations.It can be used with very tight transfers with its minimum pulley diameter rating of 6.3mm.*****All Values are nominal and subject to change without notice.*****'