b'Light Weight Belting Specification SheetCatalog # 130 Pulley Diameter, MinimumItem number: 10737Description:1 Ply Poly 51 White Matte PU x Bare AS FDAInternational Designation:EM10/1 U0/U2 White MT AS A) Normal Flex (10.00 mm) 0.3937 inB) Back Flex (15.00 mm) 0.5906 inConstruction:Compound Top Cover White PU Belt Strength:Top Cover Thickness (in) (0.20 mm) 0.0078 in Pull for 1% Elongation (9 N/mm) 51 lbs/sq inTop Cover Description MatteTop Cover Shore 87 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 18 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (0.90 mm) 0.0354 inUnit Weight- lb/PIW 0.0153 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 102 in Cross Rigid NoTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:This 2 ply white multifilament belt is most commonly used for food grade Power Turn applications. The top PU cover is an 85 Shore A urethane that is excellent for abrasion resistance and direct food contact for FDA compliant applications.*****All Values are nominal and subject to change without notice.*****'