b'Light Weight Belting Specification SheetCatalog # 2B7 Pulley Diameter, MinimumItem number: 10828Description:2 Ply Poly CR57 Clear Silicone PU Skim x Bare NA FDAInternational Designation: A) Normal Flex (34.80 mm) 1.3700 inE10/2 0/SI3 FDA B) Back Flex (54.86 mm) 2.1600 inConstruction: Belt Strength:Compound Top Cover Clear Silicone Pull for 1% Elongation (10 N/mm) 57 lbs/sq inTop Cover Thickness (in) (0.30 mm) 0.0118 inTop Cover Description Silicone Splice Instructions:Top Cover Shore 40 Foil NoCompound Bottom Cover Polyester Splice Process FingerBottom Cover Thickness (in) (0.00 mm) 0.0000 in Press Temperature (F) 320 FBottom Cover Description Bare Press Pressure (psi) 25 lbs/sq inBottom Cover Shore N/ANote:Listed above is a guideline only.Every vulcanizer is different and will Number of Plies 2 show different results.We recommend that you do a test splice with your Anti Static No press before attempting the actual belt splice.Overall Gauge (in) (1.40 mm) 0.0551 inUnit Weight- lb/PIW 0.0258 lbs/PIW Other:Material Between Plies PU Cross Rigid YesMaximum Width (in) 118 in High Heat NoTemperature Range (F)- High 230 F Impression Top NoTemperature Range (F)- Low -13 F Oil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 2B7 is a two ply monofilament construction designed for applications with a demanding performance and specific cover requirements. The silicone cover offers an FDA compliant cover with high friction, yet excellent release. The belt has the ability to negotiate small pulleys found in packaging and food handling. Good resistance to animal, mineral, vegetable oils and fats. The intermediate layer between the plies is urethane, thus the belt can be single finger spliced without the use of applying a silicone adhesive across the fingers.*****All Values are nominal and subject to change without notice.*****'