b'Belting Specification SheetCatalog # 50 Pulley Diameter, MinimumItem number: 11041 Minimum Pulley Diameter 8.00 inDescription:3 Ply HSW 1/8in Urethane x FS Belt Strength:International Designation: Tension Rating (PIW) 90 PIWN/AConstruction: Splice Instructions:Compound Top Cover Black PU Splice Step YesColor Black Splice Finger NoTop Cover Thickness (in) (3.18 mm)1/8 in Other:Top Cover Description SmoothCompound Bottom Cover Black SBR Static Conducting NoCross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoNumber of Plies 3 Oil Resistant NoFire Resistant NoOverall Gauge (in) (7.94 mm)5/16 in FDA Approved NoUnit Weight- lb/PIW 0.1250 lbs/PIW Suggested Fasteners:Carcass Type Cotton-Polyester Flexco Plate/Rivet R2Compound Black SBR Flexco Hinged N/ATemperature Range (F)- High 188 F Alligator Staple N/AClipper Lace #5Temperature Range (F)- Low 0 F Alligator Lace #35Special Characteristics:This premium belt features a cast polyurethane cover 1/8 thick. Recommended where highly abrasive cutting action would destroy a rubber-covered belt in short order. Particularly suitable for wear pads, cutting blocks, stamping operations, die cutting, roof tile manufacturing, and belt sanding units. Excellent for sharp steel parts and scrap. Available in various colors for special orders.*****All Values are nominal and subject to change without notice.*****'