b'Light Weight Belting Specification SheetCatalog # 108P Pulley Diameter, MinimumItem number: 50223Description:2PLY PolyNon-Fray CR22 White Polyolefin C x FInternational Designation:ENF 4/2 PO0/PO2 White MT AS A) Normal Flex (6.00 mm) 0.2362 inB) Back Flex (20.07 mm) 0.7900 inConstruction:Compound Top Cover ThermoplasticBelt Strength:Polyolefine Pull for 1% Elongation (4 N/mm) 22 lbs/sq inTop Cover Thickness (in) (2.03 mm) 0.0800 inTop Cover Description Matte Splice Instructions:Top Cover Shore 92Compound Bottom Cover None Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Impregnated Press Temperature (F) 0 FBottom Cover Shore N/A Press Pressure (psi) 250 lbs/sq inNote:Listed above is a guideline only.Every vulcanizer is different and will Number of Plies 2 show different results.We recommend that you do a test splice with your Anti Static Yes press before attempting the actual belt splice.Overall Gauge (in) (1.09 mm) 0.0430 inUnit Weight- lb/PIW 0.0175 lbs/PIW Other:Material Between Plies ThermoplasticCross Rigid YesPolyolefineMaximum Width (in) 118 in Impression Top NoTemperature Range (F)- High 140 F Oil Resistant YesTemperature Range (F)- Low 14 F Fire Resistant NoFDA Approved YesSpecial Characteristics:Easy to clean Polyolefin cover makes for great product release of sticky materials.The flexible non-fray fabric can flex around very small pulley diameters.This belt is hydrolysis and abrasion resistant and can be used on power turn conveyors.*****All Values are nominal and subject to change without notice.*****'