b'Light Weight Belting Specification SheetCatalog # 108HCR Pulley Diameter, MinimumItem number: 10774Description:2 PUR I 75 I / LCWInternational Designation:E13/2 UI/U75 Clear Matte AS FDA EU A) Normal Flex (69.85 mm) 2.7500 inB) Back Flex (101.60 mm) 4.0000 inConstruction:Compound Top Cover Clear PU Belt Strength:Top Cover Thickness (in) (0.74 mm) 0.0290 in Pull for 1% Elongation (13 N/mm) 75 lbs/sq inTop Cover Description MatteTop Cover Shore 92 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.36 mm) 0.0930 inUnit Weight- lb/PIW 0.0450 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:This belt is constructed of a highly cross rigid weft for use in Z-shaped conveyors or horizontal to incline conveyor applications. The cover is made of a 92 Shore A Matte Finish TPU that is abrasion resistant and meets FDA requirements for direct food contact. This belt is ideal for model K rounder belts in bakeries, automotive industry and recycling applications. Complies with FDA regulations and EU recommendations for the transport of foodstuffs, regulations include 1935/2004/EC 2023/2006 EC.*****All Values are nominal and subject to change without notice.*****'