b'Light Weight Belting Specification SheetCatalog # 108T Pulley Diameter, MinimumItem number: 42650Description:2 Ply Poly 22 Gray Teflon FDAInternational Designation:GUF-12AK A) Normal Flex (70.00 mm) 2.7559 inB) Back Flex (150.00 mm) 5.9053 inConstruction:Compound Top Cover Grey Teflon Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (2 N/mm) 10 lbs/sq inTop Cover Description SmoothTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 329 FBottom Cover Shore N/A Press Pressure (psi) 22 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.30 mm) 0.0512 inUnit Weight- lb/PIW 0.0222 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 39 in Cross Rigid NoTemperature Range (F)- High 176 FTemperature Range (F)- Low -4 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:#108T features a PTFE sheet cover that has outstanding release characteristics.The belt is food approved and can be finger or skive spliced endless.Its most typical use is found in packaging and gluing operations where hot glue gets on the belt cover and is removed by the use of a rolling surface.Maximum manufacturing width is 1 meter!*****All Values are nominal and subject to change without notice.*****'