b'Belting Specification SheetCatalog # 142 Pulley Diameter, MinimumItem number: 10560 Min. Pulley Dia. - Head @ 80 - 100%18.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%16.00 in3 Ply 330 3/16in x 1/16in Multi-Chev MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension12.00 inN/A or BelowMinimum Pulley Diameter- Tail 12.00 inConstruction: Splice Instructions:Compound Top Cover Black MOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (4.83 mm)3/16 in Other:Top Cover Description Multi-ChevCompound Bottom Cover Black MOR Static Conducting NoBottom Cover Thickness (in) (1.60 mm)1/16 in Cross Rigid NoBottom Cover Description Smooth High Heat NoImpression Top YesNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (10.32 mm)25/64 in Fire Resistant NoUnit Weight- lb/PIW 0.2500 lbs/PIW FDA Approved NoCarcass Type Polyester Nylon Suggested Fasteners:Compound Black MOR Flexco Plate/Rivet #190/R5-1/2Temperature Range (F)- High 225 FTemperature Range (F)- Low -25 F Flexco Hinged #550Alligator Staple N/ABelt Strength: Clipper Lace N/AAlligator Lace N/ATension Rating (PIW) 330 PIWSpecial Characteristics:Made to prevent or reduce slideback on steep inclines. Chevron belting also increases conveyor capacity by quick pick-up at the point of loading. Ideal for wet and/or granular materials such as wet sand and gravel. One continuous full width chevron cleat. ***NOTE:OAG DOES NOT INCLUDE THE CLEAT HEIGHT********All Values are nominal and subject to change without notice.*****'