b'Light Weight Belting Specification SheetCatalog # 135 Pulley Diameter, MinimumItem number: 10960Description:3 Ply CR135 Black RT AS SFMBInternational Designation:E24/3 0/N47 RT Black OSM N AS A) Normal Flex (152.40 mm) 6.0000 inB) Back Flex (304.80 mm) 12.0000 inConstruction:Compound Top Cover Black Nit Belt Strength:Top Cover Thickness (in) (4.75 mm) 0.1870 in Pull for 1% Elongation (24 N/mm) 135 lbs/sq inTop Cover Description RoughtopTop Cover Shore 65 Splice Instructions:Compound Bottom Cover Treated Duck Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step ColdBottom Cover Description Bare Press Temperature (F) 300 FBottom Cover Shore N/A Press Pressure (psi) 30 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (7.87 mm) 0.3100 inUnit Weight- lb/PIW 0.1157 lbs/PIWMaterial Between Plies Nitrile Other:Maximum Width (in) 72 in Cross Rigid YesTemperature Range (F)- High 180 F High Heat NoTemperature Range (F)- Low 20 F Impression Top YesOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:The 135 has a special 3 ply highly cross rigid construction designed for SFMB (Surface Finishing Machine Belt) applications. The belt features a high friction, non-marking, oil resistant cover and a low friction bottom fabric suitable for all sanding systems. Developed for use on machines finishing wood, metal and composites. This belt is designed to lay flat and will not curl on the edges due to the special monofilament carcass. Also a very good belt for materials handling and wood products applications and where a non-marking oil resistant belt is required. Excellent for use in folding rail applications in corrugated box plants.*****All Values are nominal and subject to change without notice.*****'