b'Light Weight Belting Specification SheetCatalog # 2B20 Pulley Diameter, MinimumItem number: 41997Description:2 Ply Poly 69 Clear PO x FS AS FDAInternational Designation:ES 12/2 PO0/PO6 Clear AS FDA A) Normal Flex (80.00 mm) 3.1496 inB) Back Flex (120.00 mm) 4.7244 inConstruction:Compound Top Cover Thermoplastic Belt Strength:Polyolefine Pull for 1% Elongation (12 N/mm) 68 lbs/sq inTop Cover Thickness (in) (0.60 mm) 0.0236 inTop Cover Description Matte Splice Instructions:Top Cover Shore 90 Foil NoCompound Bottom Cover PO Impregnated Splice Process FingerBottom Cover Thickness (in) (0.00 mm) 0.0000 in Press Temperature (F) 260 FBottom Cover Description Impregnated Press Pressure (psi) 22 lbs/sq inBottom Cover Shore N/ANote:Listed above is a guideline only.Every vulcanizer is different and will Number of Plies 2 show different results.We recommend that you do a test splice with your Anti Static No press before attempting the actual belt splice.Overall Gauge (in) (2.60 mm) 0.1024 inUnit Weight- lb/PIW 0.0410 lbs/PIW Other:Material Between Plies Thermoplastic Cross Rigid YesPolyolefineMaximum Width (in) 118 Impression Top NoTemperature Range (F)- High 140 F Oil Resistant YesTemperature Range (F)- Low -4 F Fire Resistant NoFDA Approved YesSpecial Characteristics:#2B20 has a high release thermoplastic Polyolefin cover that is suitable for conveying tobacco and any sticky food product.It is also perfect for use in wood finishing plants on spray booth conveyors where stain and lacquer overspray needs to be wiped from the belt surface.*****All Values are nominal and subject to change without notice.*****'