b'Light Weight Belting Specification SheetCatalog # 108V Pulley Diameter, MinimumItem number: 50225Description:3PURIR180I/LWInternational Designation:E 18/3 UO/U18 Red MT A) Normal Flex (180.00 mm) 7.0866 inB) Back Flex (240.00 mm) 9.4488 inConstruction:Compound Top Cover ThermoplasticBelt Strength:Polyurethane Pull for 1% Elongation (18 N/mm) 102 lbs/sq inTop Cover Thickness (in) (1.80 mm) 0.0709 inTop Cover Description Matte Splice Instructions:Top Cover Shore 85Compound Bottom Cover ThermoplasticFoil NoPolyurethane Splice Process FingerBottom Cover Thickness (in) (0.00 mm) 0.0000 in Press Temperature (F) 320 FBottom Cover Description Impregnated Press Pressure (psi) 29 lbs/sq inBottom Cover Shore N/A Note:Listed above is a guideline only.Every vulcanizer is different and will show different results.We recommend that you do a test splice with your Number of Plies 3 press before attempting the actual belt splice.Anti Static NoOverall Gauge (in) (5.00 mm) 0.1969 in Other:Unit Weight- lb/PIW 0.1030 lbs/PIW Cross Rigid YesMaterial Between Plies PUMaximum Width (in) 89 in Impression Top NoTemperature Range (F)- High 140 F Oil Resistant YesTemperature Range (F)- Low -13 F Fire Resistant NoFDA Approved NoSpecial Characteristics:108V is a highly cross ridged belt designed for rugged applications. The 85 shore cover is highly abrasion resistant, suitable for die stamping applications. Can be used for L and Z shaped conveying systems up to 50 wide.*****All Values are nominal and subject to change without notice.*****'