b'Light Weight Belting Specification SheetCatalog # 173 Pulley Diameter, MinimumItem number: 42203Description:3 Ply 120 Grey 50A Smooth x BareInternational Designation:EPQ CB50 Smooth A) Normal Flex (152.40 mm) 6.0000 inB) Back Flex (177.80 mm) 7.0000 inConstruction:Compound Top Cover Grey NR/SBR Belt Strength:Top Cover Thickness (in) (5.00 mm) 0.1970 in Pull for 1% Elongation (21 N/mm) 120 lbs/sq inTop Cover Description SmoothTop Cover Shore 50A Splice Instructions:Compound Bottom Cover None Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Step HotBottom Cover Description Bare Press Temperature (F) 300 FBottom Cover Shore N/A Press Pressure (psi) 75 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (9.98 mm) 0.3930 inUnit Weight- lb/PIW 0.1700 lbs/PIWMaterial Between Plies SBR Other:Maximum Width (in) 65 Cross Rigid NoTemperature Range (F)- High 220 FTemperature Range (F)- Low 20 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved NoSpecial Characteristics:Non-marking. The highest surface calibration accuracy for wood finishing industry.*****All Values are nominal and subject to change without notice.*****'