b'Light Weight Belting Specification SheetCatalog # 109 Pulley Diameter, MinimumItem number: 10822Description:2 Ply Poly CR46 White IP NA FDAInternational Designation:E8/2 U0/V5 White IP FDA A) Normal Flex (40.00 mm) 1.5748 inB) Back Flex (60.00 mm) 2.3622 inConstruction:Compound Top Cover White PVC Belt Strength:Top Cover Thickness (in) (0.50 mm) 0.0196 in Pull for 1% Elongation (8 N/mm) 46 lbs/sq inTop Cover Description Inverted PyramidTop Cover Shore 70 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 330 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.20 mm) 0.0866 inUnit Weight- lb/PIW 0.0409 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 176 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 109 meets FDA compliance standards. The Inverted Pyramid top cover increases the grip on product, excellent for slight inclines/declines of food products. This belt is resistant to oils, greases, salt and acids with low concentrations.*****All Values are nominal and subject to change without notice.*****'