b'Light Weight Belting Specification SheetCatalog # 108HTB Pulley Diameter, MinimumItem number: 50171Description:2 Ply Poly CR28 Blue PU Matte x Bare AS FDA HTInternational Designation:E5/2 U0/U2 BLUE HT AS A) Normal Flex (8.00 mm) 0.3150 inB) Back Flex (15.00 mm) 0.5906 inConstruction:Compound Top Cover Blue PU Belt Strength:Top Cover Thickness (in) (0.20 mm) 0.0079 in Pull for 1% Elongation (5 N/mm) 28 lbs/sq inTop Cover Description MatteTop Cover Shore 86 Splice Instructions:Compound Bottom Cover PU Impregnated Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 335 FBottom Cover Shore N/A Press Pressure (psi) 15 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.20 mm) 0.0472 inUnit Weight- lb/PIW 0.0205 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 311 FTemperature Range (F)- Low -4 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved YesSpecial Characteristics:#108HTB is ideal for oven infeed or outfeed applications in bakeries.The specialty urethane compound is uniquely resistant to heat and can handle temperatures up to 311F.*****All Values are nominal and subject to change without notice.*****'