b'Belting Specification SheetCatalog # 10 Pulley Diameter, MinimumItem number: 10402 Minimum Pulley Diameter 2.50 inDescription:3 Ply Poly 105 White Teflon COS Belt Strength:International Designation: Tension Rating (PIW) 105 PIWN/AConstruction: Splice Instructions:Compound Top Cover White Teflon Splice Step YesColor White Splice Finger NoTop Cover Thickness (in) (0.05 mm) 0.00 in Other:Top Cover Description TeflonCompound Bottom Cover White Nitrile Static Conducting NoCross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoNumber of Plies 3 Oil Resistant YesFire Resistant NoOverall Gauge (in) (1.59 mm)1/16 in FDA Approved YesUnit Weight- lb/PIW 0.0500 lbs/PIW Suggested Fasteners:Carcass Type Polyester Flexco Plate/Rivet N/ACompound White Nitrile Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple #62Clipper Lace #1XSPTemperature Range (F)- Low 0 F Alligator Lace #1Special Characteristics:Excellent for wet, sticky materials and operations involving gluing, coating, spreading; best release characteristics. The slippery top surface is created by the thin teflon film. Carcass is strong and flexible. FDA accepted.*****All Values are nominal and subject to change without notice.*****'