b'Light Weight Belting Specification SheetCatalog # 145 Pulley Diameter, MinimumItem number: 10868Description:3 Ply Poly CR125 Gray PVC C x Bare ASInternational Designation:E22/3 0/V20 Gray AS A) Normal Flex (120.00 mm) 4.7244 inB) Back Flex (150.00 mm) 5.9055 inConstruction:Compound Top Cover Gray PVC Belt Strength:Top Cover Thickness (in) (2.00 mm) 0.0787 in Pull for 1% Elongation (22 N/mm) 125 lbs/sq inTop Cover Description SmoothTop Cover Shore 83 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Double FingerBottom Cover Description Bare Press Temperature (F) 360 FBottom Cover Shore N/A Press Pressure (psi) 28 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (4.88 mm) 0.1920 inUnit Weight- lb/PIW 0.0950 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 180 F High Heat NoTemperature Range (F)- Low 5 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:This belt has a high tensile strength 3 ply polyester construction which is ideal for low stretch and heavy loads. The cover is a full 2.0 mm thick 83 durometer gray PVC that is abrasion resistant, oil and fat resistant. The three plies are made up of polyester monofilament with lateral stability, this makes the belt ideal for hoodwall belt applications.*****All Values are nominal and subject to change without notice.*****'